Researchers at the University of Arkansas have demonstrated a way to 3D-print simulated lunar dust into interlocking, Lego-like bricks without using binders. The approach could eventually help NASA manufacture construction materials on the Moon, reducing the equipment and supplies that would need to be transported from Earth for a permanent lunar base.
Printing bricks from simulated lunar regolith
The study was published in NPJ Advanced Manufacturing. Cole McCallum was the first author and an undergraduate at the University of Arkansas when the research was conducted. Wang Shaw, an assistant professor of mechanical engineering at the university, was the lead author.
The team used a 3D-printing technique called laser powder bed fusion. The process begins by spreading a thin layer of powder across a flat surface. A focused light source heats the particles until they fuse, a process known as sintering. The printing platform then moves downward, another layer of powder is added, and the particles are fused. Repeating these steps gradually produces a three-dimensional object.
Lunar regolith differs from Earth’s soil because it contains no organic matter. Instead, it consists of sharp, irregular debris created by billions of years of impacts from asteroids, micrometeorites and other material striking the Moon.
Because actual lunar material is difficult to obtain, the researchers used a commercially available substitute called Lunar Highlands Regolith Simulant, or LHS-1. The material is designed to resemble samples returned by NASA’s Apollo missions in the 1960s and early 1970s.
Bonding moon dust without binders
Earlier attempts to 3D-print structures from lunar regolith relied on additional substances called binders to hold the particles together. Although binders can increase the strength of printed structures, they would create a major logistical challenge because they would have to be shipped from Earth.
The University of Arkansas team used a different approach. The researchers reported that they were the first to directly bond and fuse simulated lunar regolith into reconfigurable building blocks without adding binders, using a relatively low-power light source. In this process, the lunar dust particles bond directly to one another rather than being held together by another material.
“There’s nothing else that’s bound to it. The regolith powder is bound to itself,” McCallum said.
The team produced small bricks a few centimeters in diameter, including pieces shaped like a cross and the letter H. Their interlocking designs allow the blocks to fit together in a way similar to Lego pieces, potentially enabling larger structures to be assembled from individual printed components.
However, the experimental bricks are not yet ready for demanding construction applications. Compared with objects made using binders, blocks produced solely from simulated lunar regolith contain more internal pores and have lower structural strength.
“These structures that we’re building can be self-supporting,” McCallum said. “However, I would hesitate to say that our process can be used for anything supporting other loads just yet.”
Challenges for building on the Moon
Before the technology could be used on the Moon, researchers would need to answer several important questions. Shaw said scientists still need to understand how the printing process would work in the Moon’s low-gravity environment and vacuum. The strength and durability of the finished bricks would also need to be improved before they could be used in practical construction.
Despite these challenges, Shaw believes the technology could eventually provide an efficient way to manufacture construction components and larger structures for lunar settlements. Producing interlocking bricks from locally available material could be especially valuable as NASA works toward establishing a sustained human presence on the Moon.
The role of undergraduate research
For McCallum, the project also provided an opportunity to gain scientific experience early in his education. A native of Little Rock, Arkansas, he joined Shaw’s laboratory during the early stages of his undergraduate research at the University of Arkansas.
“He had a strong belief that undergraduates should be more involved in research,” McCallum said.
McCallum graduated in May with dual degrees in mechanical engineering and physics. His academic achievements also led to his selection as one of the first Lafayette Fellows, a competitive program that selected 30 students from more than 3,400 applicants. Established to commemorate the 250th anniversary of the United States, the fellowship supports students pursuing master’s degrees in France.
He is now studying aerospace engineering at the Institute of Advanced Studies in Aerospace Engineering, also known as ISAE-SUPAERO, in Toulouse. The institute is one of France’s leading aerospace engineering institutions.
Although his current research is moving in a different direction from the additive-manufacturing work he conducted in Shaw’s laboratory, McCallum said the experience helped him develop important research skills. By overcoming experimental difficulties and learning from failed attempts, he gained a foundation for future scientific work.
“It helps you improve and overcome all the problems you face as a researcher. There are a lot of first-time failures,” he said. “It was really good to get a start before the other guys and make some mistakes early on.”
Source: www.sciencedaily.com











